Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Hint!
Disc Rotor in Punch Design, 6-Hole, Shimano compatibel
Disc Rotor in Punch Design, 6-Hole, Shimano compatibel
MTB brake discs in Punch design • Shimano compatible • heat treated • many small holes integrated in the braking surface • developed with Intend BC ➔ Available sizes are: Ø140, Ø160, Ø180, Ø190, Ø200, Ø203, Ø210, Ø220 mm Made from...
From €89.00 *
Disc Shims / Spacer for 6-hole Disc Rotors, available in different thicknesses
Disc Shims / Spacer for 6-hole Disc Rotors, available in different...
The disc shims / spacers centers the brake disc perfectly within the brake caliper. For different wheel-sets, this means you'll avoid brake drag after having swapped wheels (available in different thicknesses).
From €1.50 *
Canti Studs / Brake Bosses for U-Brakes in size M10, fit on BMX Bikes
Canti Studs / Brake Bosses for U-Brakes in size M10, fit on BMX Bikes
CNC machined Canti Studs / Brake Bosses for U-Brakes - suitable for BMX Bikes The internal thread of Canti Studs is M6. They are made ​​of stainless steel. To reduce weight, the Canti Studs are drilled hollow. The Canti Studs are...
€12.00 * €13.55 *
Hint!
Canti Studs / Pivot Bosses in size M6 for Magura and Mag 21 forks (optional with Spring Retainer)
Canti Studs / Pivot Bosses in size M6 for Magura and Mag 21 forks...
CNC machined Canti Studs / Brake Bosses / Brake Mounts for v-brake - suitable for Magura, Easton and Van Tuyl, optional with Replacement ring for all of our three piece brake bosses with 3 holes for the brake return spring. The internal...
From €9.90 * €11.21 *
Canti Studs with 5-16"-18 UNC Inch Thread e.g. for KLEIN, Fat Chance and Cannondale
Canti Studs with 5-16"-18 UNC Inch Thread e.g. for KLEIN, Fat Chance and...
CNC machined Canti Studs / Brake Bosses to fit the v-brake.The internal thread of the Canti Studs is M6. The bases are made of stainless steel and therefore corrosion-free and are easily replace the standard Studs. Compatibility - KLEIN...
From €11.90 *
Disc Shims for Disc Rotors - 6-Hole, BionX compatible
Disc Shims for Disc Rotors - 6-Hole, BionX compatible
The disc shim centers the brake disc perfectly within the brake caliper. For different wheel-sets, this means you'll avoid brake drag after having swapped wheels (available in different thicknesses).
From €2.20 *
Hint!
Canti Studs Brake Bosses in size M8 for V-Brakes (without flange) for RockShox
Canti Studs Brake Bosses in size M8 for V-Brakes (without flange) for...
CNC machined Canti Studs / Brake Bosses to fit the v-brake, suitable for RockShox and Manitou Forks The internal thread to fit the v-brakes is M6. They are made ​​of stainless steel and high strength Aluminium. To reduce weight, the...
From €10.40 *
Hint!
220mm MTB Brake Disc for eBikes
Ø190, Ø210 and Ø220mm Brake Disc, Wave Design, 6-hole, Magura compatible
Brake Disc in hardened version, developed specifically for downhill use, Magura compatible, different thicknesses available Description optimal cooling by perforated braking area, developed for downhill use function optimized,...
From €49.00 *
Hint!
160mm und 180mm Bremsscheibe für Rohloff Speedhub, Magura und Shimano kompatibel
Brake Disc in XT Design for Rohloff Hubs, 4-Hole, different Friction...
4-Hole Brake Disc in hardened version in XT Design for Rohloff Speehub, different Friction Ring width available, Shimano compatible, available sizes: Ø160 - Ø210mm Update 2019 Optimization of the design of the brake disc in the area of...
From €46.00 *
Canti Studs M8 with 3-hole Spring Plates for Cyclecross Forks
Canti Studs M8 with 3-hole Spring Plates for Cyclecross Forks
CNC machined canti studs, size M8 including a 3-hole spring plates for forks without counter holder for spring, as well suitable for CycleCross Forks This canti-stud kit is suitable for fork / frames without the locking pin of the...
€17.00 *
3-Hole Plates for the brake return spring on V-Brakes
3-Hole Plates for the brake return spring on V-Brakes
Replacement ring / Brake ring for all of our three piece brake bosses. It is laser from 1,5mm stainless stee, with 3-holes for the brake return spring. Compatibility: FA-M6 ➔ suitable for canti studs in size M6 M6 FA-M8 ➔ suitable for...
€7.50 *
Hint!
Canti Studs / Brake Bosses M8 for Cannondale / Manitou / Fox / Staiger
Canti Studs / Brake Bosses in size M8, fits on Manitou and Fox forks
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for Fox and Manitou Forks The internal thread to fit the v-brakes is M6. They are made ​​of stainless steel and high strength Aluminium. To reduce weight, the Canti...
From €10.50 * €10.67 *
Spacer for IS Brake Caliper
Spacer for IS Brake Caliper
Die Ausgleichsspacer für IS Bremssattel als wichtiger Helfer bei der Montage an Rahmen und / oder Federgabel. Das Problem bei einer IS2000 Bremssattelausrichtung kennt wahrscheinlich jeder - die Fertigungstoleranzen sind teilweise zu...
€4.20 *
 Screw Set M5x10-T25 for MTB Brake Discs
Screw Set M5x10-T25 for MTB Brake Discs
Torx steel screw set to mount the MTB Brake discs on the hub.
From €2.50 *
Canti Studs M10x1,25 for V-Brakes, used mostly on rear brake, fitted on GT, Radeon and Trek
Canti Studs M10x1,25 for V-Brakes, used mostly on rear brake, fitted on...
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for GT, Radon and Trek This Canti Studs are the most commonly used on rear brake. The internal thread of Canti Studs is M6. They are made ​​of stainless steel and high...
From €9.95 *
Disc Rotor in RT Design for Coda Hubs 4-Hole, Shimano compatible
Disc Rotor in RT Design for Coda Hubs 4-Hole, Shimano compatible
4-Hole Brake Disc in hardened version in RT Design for Coda Hubs, Shimano compatible, available sizes: Ø160 / Ø180mm Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible...
From €44.00 *
Canti Studs / Brake Bosses for Marzocchi Forks
Canti Studs / Brake Bosses for Marzocchi Forks
CNC machined Canti Studs / Brake Bosses Adaptor Kit to fit v-brakes - suitable for Marzocchi Forks The Canti-Pin / Canti-Pin Adapter Kit is required to run Marzocchi with rim brake (prerequisite of course, is that the fork and that are...
€25.50 * €27.29 *
 Titan Grade 5 Screw Set M5x10-T25 for MTB Brake Discs
Titan Grade 5 Screw Set M5x10-T25 for MTB Brake Discs
Torx Titan Grade 5 screw set to mount the MTB Brake discs on the hub.
From €18.80 * €22.91 *
Hint!
4-Hole Disc Shims for Rohloff Disc Rotors, available in different thicknesses
4-Hole Disc Shims for Rohloff Disc Rotors, available in different...
The disc shim centers the brake disc perfectly within the brake caliper. For different wheel-sets, this means you'll avoid brake drag after having swapped wheels (available in different thicknesses).
From €1.70 *
Canti Studs / Brake Bosses in size M10 for RST, Winora, Merlin
Canti Studs / Brake Bosses in size M10 for RST, Winora, Merlin
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for GT LTS and RST The internal thread to fit the v-brakes is M6. They are made ​​of stainless steel and high strength Aluminium. To reduce weight, the Canti Studs are...
From €9.90 *
Canti Studs / Brake Bosses in size M6x0.75 for Marzocchi Bomber (Canti-Pin M-Arch)
Canti Studs / Brake Bosses in size M6x0.75 for Marzocchi Bomber...
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for Z1 Wedge, Z2 X-Fly, Marzocchi Bomber Z3 M80 (Mg-Arch) The internal thread to fit the v-brakes is M6. They are made ​​of stainless steel. To reduce weight, the...
€15.50 *
Hint!
Ø203mm Brake Disc, Wave Design, 6-hole, Magura compatible
Ø203mm Brake Disc, Wave Design, 6-hole, Magura compatible
Brake Disc in hardened version, developed specifically for downhill use, Magura compatible, different thicknesses available Update 2019 Further optimization of the braking surface and the inner area for receiving the brake disc on the...
From €55.00 *
Hint!
Online configurator for individual brake discs
Online configurator for individual brake discs
Our new online configurator - the fastest way to your individual brake disc Configure individual brake discs online yourself - choose your size, select the desired design, enter the desired text and after a few seconds the screen will...
From €82.00 *
Canti Studs / Brake Bosses in size M6 for Marzocchi Bomber Z1 (Canti-Pin Bam)
Canti Studs / Brake Bosses in size M6 for Marzocchi Bomber Z1 (Canti-Pin...
CNC machined Canti Studs / Brake Bosses for Marzocchi models from 1997-2001 - suitable for Z1 Dual, Z1 Drop Off, Z1 MCR, Z3 and DH3 Canti Studs for all bomber forks 97-2001. Short boss suitable for forks with older style CNC / lattice...
€14.90 *
Hint!
160mm Bremsscheibe im XT Design, 6-Loch, Shimano kompatibel, verschiedene Reibringbreiten lieferbar
Disc Rotor in XT Design, 6-Hole, Shimano compatibel (different Frictions...
6-Hole Disc Rotor in hardened version in XT Design, different Frictions Rings available Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands,...
From €44.00 *
Canti Studs / Brake Bosses in size M10x1 for V-Brakes
Canti Studs / Brake Bosses in size M10x1 for V-Brakes
CNC machined Canti Studs / Brake Bosses to fit the v-brake - suitable for SR Suntour, Surly and YETI A.R.C. The internal thread to fit the v-brakes is M6. They are made ​​of stainless steel and high strength aluminium. To reduce weight,...
From €10.50 *
Befestigungsschrauben für 4-Loch Rohloff Bremsscheiben
Befestigungsschrauben für 4-Loch Rohloff Bremsscheiben
Befestigungsschrauben zur Montage von 4-Loch Bremsscheiben an alle Speedhub Naben Diese Schrauben dienen zur Befestigung der Bremsscheibe an die Nabe. Die Schrauben sollten mit einem Anzugdrehmoment von max. 7Nm befestigt werden...
€5.20 *
Disc Shims for Disc Rotors - 4-Hole for Coda Hubs
Disc Shims for Disc Rotors - 4-Hole for Coda Hubs
The disc shim centers the brake disc perfectly within the brake caliper. For different wheel-sets, this means you'll avoid brake drag after having swapped wheels (available in different thicknesses).
From €1.40 *
Canti Studs M10x1 with 3-hole Spring Plates for Cyclecross Forks
Canti Studs M10x1 with 3-hole Spring Plates for Cyclecross Forks
CNC machined canti studs, size M10x1 including a 3-hole spring plates for forks without counter holder for spring, as well suitable for CycleCross Forks This canti-stud kit is suitable for fork / frames without the locking pin of the...
€17.00 * €17.64 *
Disc Rotor in Uni Design for Coda Hubs, 4-Hole, Cannondale compatible
Disc Rotor in Uni Design for Coda Hubs, 4-Hole, Cannondale compatible
4-Hole Disc Rotor in hardened version in Wave Design for Coda Hubs, available sizes: 160 / 180 / 185mm Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all...
From €42.00 *
Brake Disc in RT Design for Rohloff Hubs, Shimano compatible, 4-Hole
Brake Disc in RT Design for Rohloff Hubs, Shimano compatible, 4-Hole
4-Hole Disc Rotor in hardened version in RT Design for Rohloff Speehub • Shimano compatible • installed by Poison Bikes Germany ➔ Available sizes are: Ø160, Ø180, Ø200 und Ø203 mm Description complete brake pad 100% engaged (pad cleaning...
From €45.90 *
Brake Disc in SGB Design for Rohloff Hubs, Ashima and Magura MT5 / MT7 compatible
Brake Disc in SGB Design for Rohloff Hubs, Ashima and Magura MT5 / MT7...
4-Hole Brake Disc in hardened version in SGB Design for Rohloff Speehub, Ashima and Magura MT5 / MT7 compatible, available sizes: Ø160 and Ø180 Description - optimal cooling by perforated braking area - function optimized, symmetrical...
From €40.00 * €41.92 *
Hint!
Canti Studs M10x1.25 with 3-hole Spring Plates for Cyclecross Forks
Canti Studs M10x1.25 with 3-hole Spring Plates for Cyclecross Forks
CNC machined canti studs, size M10x1,25 including a 3-hole spring plates for forks without counter holder for spring, as well suitable for CycleCross Forks This canti-stud kit is suitable for fork / frames without the locking pin of the...
€16.02 * €17.35 *
BionX IGH Disc Rotor, Magura and Shimano compatibel (Version 2)
BionX IGH Disc Rotor in Uni Design, 6-Hole, Magura and Shimano compatibel
6-Hole Disc Rotor in hardened version in Uni Design, BionX IGH compatible Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands, just make...
From €43.70 * €44.84 *
Disc Rotor 6-Hole | Pin-Up Design | Magura compatible | heat treated and wear resistant
Disc Rotor 6-Hole | Pin-Up Design | Magura compatible | heat treated and...
6-Hole Disc Rotor in hardened version in Pin-Up Design Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands, just make sure the outer...
From €34.40 * €41.92 *
Canti Studs / Brake Mounts for U-Brakes in size M10x1.25
Canti Studs / Brake Mounts for U-Brakes in size M10x1.25
CNC machined Canti Studs / Brake Mounts for U-Brakes - suitable for BMX Bikes The internal thread of Canti Studs is M6. They are made ​​of stainless steel. To reduce weight, the Canti Studs are drilled hollow. The Canti Studs are...
€12.50 * €13.55 *

Products from BrakeSTUFF

Viewed