Accessories
Customers also viewed
Hint!
Hint!
BrakeStuff brake disc XT Design | 6-hole | AVID Shimano compatible
- Order number: IS160-XT
6-Hole Disc Rotor in hardened version in XT Design, different Frictions Rings available ➔... more
Product information "BrakeStuff brake disc XT Design | 6-hole | AVID Shimano compatible"
6-Hole Disc Rotor in hardened version in XT Design, different Frictions Rings available
➔ Available sizes are: Ø160 mm / Ø180 mm / Ø185 mm / Ø203 mm / Ø220 mm
Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands, just make sure the outer diameter is correct and the correct caliper adaptor is fitted.
Update 2023
Optimization of the design for even more lateral stability. Adjustment of the hole pattern of the friction ring surface so that the brake pad is used even more evenly, so that the pad cleaning works optimally and the wear on the brake disc and the brake pad is significantly reduced.
Update 2022
The two thicknesses of 2.10 mm and 2.20 mm are combined in all variants to form a thickness of 2.15 mm.
From now on, all slide-design brake discs are glass bead blasted. This finishing treatment reduces the breaking-in time of the brake discs, rounds off all sharp edges caused by production and gives the brake disc an even better look.
Update 2020
Revision of the design of the brake disc and the brake surface, arrangement of the holes optimized and additional recesses made so that the complete brake pad is 100% engaged. The topping is cleaned over the entire width of the friction ring. From 2020, the Ø160mm version will also be available in 2.10 and 2.20mm.
Width of the braking surface
- Ø160 mm = 15 mm
- Ø160 - 18mm = 18 mm
- Ø180 mm = 16 mm
- Ø185 mm = 16 mm
- Ø203 mm = 16 mm
- Ø203 - 18mm = 18 mm
- Ø220 mm = 16,5 mm
Weight
- Ø160 mm = 131 g
- Ø180 mm = 170 g
- Ø185 mm = 175 g
- Ø203 mm = 185 g
Information for the heat treatment:
For additional stability and strength, all our disc brakes are heat treated. During this process, basic strength in addition to the resilient properties of the material can be improved. As a result, our discs have a very high level of strength, and visibly lower wear, which gives the discs a longer life! In addition, the risk of bending the disc is reduced, so your disc should stay straighter, longer!
These effects are only visible when the disc is installed correctly, and the brake is used properly.
Available downloads:
| Rotor Size: | 160mm, 180mm, 185mm, 203mm, 220mm |
| Standard / Pitch Circle Diameter PCD: | 6-Hole (IS2000) |
| Disc Thickness: | 2.15mm, 1.95mm |
| Material: | High alloy stainless steel ( AISI 420 C) |
| Surface treatment: | Heat treated and precision ground |
| Tightening Torque: | 4-5 Nm |
| Braking Surface: | 15mm, 16mm, 18mm |
| Quantity: | 1x Brake Disc incl. 6 steel bolts T25 |
Read, write and discuss reviews... more
Customer evaluation for "BrakeStuff brake disc XT Design | 6-hole | AVID Shimano compatible"
From: Bernd M. On: 4 Aug 2021
Die beste Scheibe die ich in 5 Jahren
Sep. 2020 kaufte ich die erste BrakeSTUFF 180 mm / 2,2mm für mein Trekking-eBike. Seit dem rund 2000 km bei Wind und Wetter damit gefahren. Kein Quietschen bei Nässe, kein Verzug und bis heute kein Verschleiß. Die Bremsbeläge sehen besser aus. Keine Riefen, keine Abplatzungen. Bremsanlage Shimano SAINT mit Metallbelägen. Heute meine 2 BrakeSTUFF auf der Vorderachse verbaut. Nach Vorschrift eingebremst, erste Testfahrt mit Anhänger und 35 kg Getränkekisten. Super dosierbare Bremse. Kurzer Bremsweg trotz Anhänger. Durch die lange Haltbarkeit, werde ich wohl erst wieder in ein paar Jahren einen Satz BrakeSTUFF kaufen müssen. Alles zusammengenommen, sind sie jeden Cent Wert.
From: Admin On: 12 Aug 2021
Vielen Dank für das positive Feedback und immer Kette rechts.
Write an evaluation
Evaluations will be activated after verification.
Viewed