Accessories
Customers also viewed
Hint!
Hint!
Disc Rotor in Punch Design for Rohloff Speedhub | Shimano compatibel
- Order number: RL160-Punch
MTB brake discs in Punch design • Shimano compatible • heat treated • many small holes... more
Product information "Disc Rotor in Punch Design for Rohloff Speedhub | Shimano compatibel"
MTB brake discs in Punch design • Shimano compatible • heat treated • many small holes integrated in the braking surface
➔ Available sizes are: Ø160, Ø180, Ø203, Ø220 mm
Made from stainless steel which is hardened then ground flat, for a long lasting rotor with perfect trueness. Compatible with all major brake brands, just make sure the outer diameter is correct and the correct caliper adaptor is fitted.
Description
- Mechanical brake test according to DIN EN ISO 4210-2: 2015-12 and velotech.de Q2015 standard passed with top values
- Brake surface with many small holes to increase the effective area to absorb and dissipate the heat generated during braking ➔ 30% more surface area compared to a comparable standard brake disc
- less wear of the brake pads due to many small holes in the brake surface
- use with organic / semi-organic brake pads
- also available in thickness 2,15 and 2.20 mm (compatible with AVID, Magura and Shimano brake systems)
Compatible with
- AVID / SRAM
- Formula
- Hayes
- Hope
- Magura
- Shimano
- TRP
Width of the braking surface
- Ø160 mm = 14,5 mm
- Ø180 mm = 16 mm
- Ø203 mm = 17 mm
- Ø220 mm = 17 mm
Weight
- Ø160 mm = 130 g
- Ø180 mm = 158 g
- Ø180 mm = 177 g (Thickness: 2,15 mm)
- Ø203 mm = 194 g
- Ø203 mm = 219 g (Thickness: 2,15 mm)
- Ø220 mm = 260 g (Thickness: 2,20 mm)
Information for the heat treatment:
For additional stability and strength, all our disc brakes are heat treated. During this process, basic strength in addition to the resilient properties of the material can be improved. As a result, our discs have a very high level of strength, and visibly lower wear, which gives the discs a longer life! In addition, the risk of bending the disc is reduced, so your disc should stay straighter, longer!
These effects are only visible when the disc is installed correctly, and the brake is used properly.
Available downloads:
| Rotor Size: | 160mm, 180mm, 203mm, 220mm |
| Design: | Punch Disc |
| Standard / Pitch Circle Diameter PCD: | 4-hole for Rohloff |
| Disc Thickness: | 2.15mm, 1.95mm, 2.20mm |
| Material: | High alloy stainless steel ( AISI 420 C) |
| Surface treatment: | Heat treated and precision ground |
| Tightening Torque: | 10 Nm |
| Braking Surface: | 16mm, 17mm |
| Recommended Brake Pads: | Organisch / Semi-Organisch |
Read, write and discuss reviews... more
Customer evaluation for "Disc Rotor in Punch Design for Rohloff Speedhub | Shimano compatibel"
Write an evaluation
Evaluations will be activated after verification.
Viewed